Description

Service to the industry and R&D Center for calibration and measurement in the areas of activity. Laboratory accredited by ENAC as Calibration and Testing Laboratory (according to UNE-EN ISO/IEC 17025). Intercomparisons and study of assurance processes. Techniques in different areas: Dimensional Calibration Area: - Three-dimensional measuring machine DEA MISTRAL SP, with software PCDMIS CAD ++ - Three-dimensional measuring instrument BROWN-SHARPE Chamaleon, with software PCDMIS CAD ++ - Laser interferometric system, HP 5519ª.- Measuring machine of 1 coordinate TRIMOS, capacity 1000 mm.- Measuring machine of 1 coordinate MAHR 828, capacity 500 mm.- Callibration bench blocks MAHR, capacity 100 mm, resolution: 0,01 μm.- calibration bench, comparators SYLVAC M2b, capacity: 25 mm, resolution: 0,1 μm.- calibration bench, comparators SYLVAC M3, capacity: 50 mm, resolution: 0,01 μm.- profile projector NIKON V-16 E, resolution 1 μm.- Dynascope Projector - Vision Engineering, resolution 1 μm.- Roughness meter / profilometer MAHR PERTHEN.- Mobile probe gauge, MITUTOYO.- Form measurer MAHR FORMMETER F2P.- Set of Longitudinal Pattern Blocks, range: 0.5 - 100 mm, grade K.- Set of Longitudinal Pattern Blocks, range: 0.5 - 100 mm, grade 0.- Set of Longitudinal Pattern Blocks, range: 0.5 - 100 mm, grade 1.- Set of Longitudinal Pattern Blocks TESA - SET of cylindrical patterns of internal diameter, range: 6 - 100 mm.- Set of rugosity and amplification patterns RANK TAYLOR-HOBSON.- Set of flat-parallel patterns of glass MITUTOYO.- Roundness pattern.- Sphericity pattern.- Hardness patterns.- Baro-portable thermo-hygrometers, AMR.- Climatic conditions measurement station AHLBORN.- Straightness standards.- Fixed strokes standards.- Flatness tables.- TESA Clinometer.Mechanical-Mass Calibration Area: - Normalized mass pattern sets, class E2, scope: 1 mg - 10 kg.- Sets of standardized mass patterns, class F1, range: 1 mg - 50 kg.- Sets of standardized mass patterns, class F2, range: 1 mg - 20 kg.- SARTORIUS monoplate balance, capacity: 5 g, resolution 0.001 mg.- SARTORIUS monoplate balance, capacity: 200 g, resolution 0.01 mg.- METTLER-TOLEDO monoplate balance, capacity: 500 g, resolution 0.1 mg.- SARTORIUS monoplate balance, capacity: 5 kg, resolution 1 mg.- SARTORIUS monoplate balance, capacity: 50 kg, resolution 10 mg. Mechanical Calibration-Force-Torque Area: - CRANE-ELECTRONICS Torque Calibration Bank, capacity: 1 Nm - 1000Nm.- HBM force measurement chain with electronic extensiometric indicator and power transducers with capacity: 50 N - 100 kN, traction / compression modes.- SHIMADZU AG-IS 100 kN force generating machine, with measuring capacity: 50 N -100 kN, traction / compression modes.

Other information